Author Archives: sw0rdm4n

Inem Robot Android Control Module Testing

android control module:
speed control: 155,215,255

movement control : forward , backward, turn left, turn right
webcam tilt control: head move up, head move down, head move left, head move right

Advertisements

Finished New Prototype Product Called Airhax – A Wireless Network Auditor

1

2

3

 

airhax functionalities :

1. crack(aircrack)-> arp spoof & autopawn using metasploit.

2. as evil twin with airbase-ng or karma rc.

powered by kali linux, raspberry pi 2 , signal king with edimax 9dbi antenna, tlwn722n.

robot power bank 20000 mah

Edimax supply ampere: 3 amps

Haxtronic Basic Movement Test and Artificial Narrow Intelligence

Haxtronic Robot Explains About Exploitation Technics (part of artificial narrow intelligence)

 

Haxtronic Robot Basic Movement Test for arm, wheels, camera, and ultrasonic sensor head movements)

 

Demonstrating Haxtronic’s artificial narrow intelligence : cracking wpa2 psk & reporting to internet

 

haxtronic is the first generation hacker robot made by Indonesian

Developing and Rising the Machines for New Era

x
Decided haxtronic with only 1 hand and 1 camera. ability not just limited to 802.11 cracks, using 3 arduinos as motoric, cpu is using 2 intel core 1,85ghz, equipped with gps, ability not just limited to wpa/wep crack, this is able to calculate nearby subnet for arp poisoning, able to use metasploit for auto exploitation. since using arduino (next release probably will use picaxe) it’s easy to add 433 mhz receiver and transmitter. Handling rtl-sdr very well. why not as drone? cause this robot has some sort of artificial intelligence (SRPL), deep learning (part of machine learning), personality based on PAD and 4 main charasteristic (melancholic, sanguinist, choleric, plegma). NLP (natural language processing). I won’t share how do I made this. This will be shared as an end user product. currently developing focus on it’s artificial intelligence.

DIY – USB Mini Fan

This is a very easy guide to make an usb powered mini fan.

Requirement:

– 1 usb cable
– 1 quadcopter propeller
– 1 breadboard
– soldering iron + tin
– 2 jumper wire
– 1-3 0,1 microfarad 50v capacitor
– 1 usb charger (alternatively you can powered up the fan later using power bank or usb port from pc or laptop or any usb charger)

diyfan0

 

First of all, cut the usb cable and isolate the plus and minus from the data transfer cables (green and white is data transfer cable).

diyfan2

As we already know that any usb cable consist of 4 different cables:
diyfannx

The red one is for positive volt, the black one is for negative volt, the green will be used for upstream data transfer and the white one will be used for downstream data transfer.

Here we got isolated plus and minus cable where each of the cable has been soldered with tip of jumper wire (the red and black one) which is ready to be plugged into our positive and negative spot on breadboard.

diyfan2.2

Next solder the 0.1 µF ceramic capacitor across the motor dc (we can use 1-3 capacitor to deal with motor noise), and plug the quadcopter propeller on top.

Once the ceramic capacitor has been soldered, add 2 jumper wires in order to plug it to breadboard.

diyfan3

And finaly, plug the usb cable and the jumper wire from motor dc on the breadboard and the usb fan is ready.

diyfan4

This usb fan is ready to powered via any 5v power supply. You can powered it with a charger, any usb port from laptop or pc, any power banks or any other 5v power supply.

Here’s the usb fan in action: